| Home < Products
< Solar system controllers, regulators
and meters |
|
|
|
Solar system controllers, regulators and meters
Plasmatronics Solar Regulators
| Plasmatronics PR1210
12V 10A sealed Solar Regulator |
85.00
|
| The PR1210 is a simple two stage regulator
for charging lead acid batteries from photovoltaic panels. |
|
|
|
Back to top of page
| Plasmatronics PL20
Solar Controller |
335.00
|
| The PL20 is a progamable solar controller
suitable for 12V, 24V or 48V systems. Maximum charge
current 20A, Maximum Load current 20A. The ability
to program this unit enables full customisation of
the regulation settings including shunt regulation
and PWM options. |
|
|
|
| Plasmatronics PL40
Solar Controller |
468.00
|
| The PL40 is a progamable solar controller
suitable for 12V, 24V or 48V systems. Maximum charge
current 40A, Maximum Load current 5A. The ability
to program this unit enables full customisation of
the regulation settings including shunt regulation
and PWM options. |
|
|
|
| Plasmatronics PL60
Solar Controller |
671.00
|
| The PL60 is a progamable solar controller
suitable for 12V, 24V or 48V systems. Maximum charge
current 60A, Maximum Load current 30A. The ability
to program this unit enables full customisation of
the regulation settings including shunt regulation
and PWM options. |
|
|
|
| Plasmatronic PL40
108V Solar Controller |
1,140.00
|
| The PL40 is a progamable solar controller
designed for suitable for 108V systems. Maximum charge
current 40A, The ability to program this unit enables
full customisation of the regulation settings including
shunt regulation and PWM options. |
|
|
|
Back to top of page
| Plasmatronic PL40
108V Solar Controller |
1,140.00
|
| The PL40 is a progamable solar controller
designed for suitable for 108V systems. Maximum
charge current 40A, The ability to program this
unit enables full customisation of the regulation
settings including shunt regulation and PWM options. |
|
|
|
| Plasmatronics External
Temperature Sensor |
44.00
|
| This sensor is suits the
PL20, PL40 and PL60 Controllers. The sensor is attached
to the battery to allow accurate temperature compencation
|
|
|
|
| Plasmatonics PLS2
external shunt adaptor |
174.00
|
|
|
|
Morningstar Solar Controllers
| PS15 ProStar 15A 12V/24V
solar controller |
201.00
|
|
The PS-15 solar controller is rated at 15A solar
input and 15A load current. It features pulse width
modulated series battery charging, low voltage load
disconnect and a choice of three programs for: gel,
sealed or flooded lead acid batteries. A remote temperature
sensor is available as an option for $58.00.
|
|
|
|
| PS15M ProStar 15A 12V/24V
solar controller, with digital meter |
313.00
|
|
The PS-15 solar controller is rated at 15A solar
input and 15A load current. It features pulse width
modulated series battery charging, low voltage load
disconnect and a choice of three programs for: gel,
sealed or flooded lead acid batteries. The digital
meter displays voltage, input current, output current
and temperature. It does not log amp-hours. A remote
temperature sensor is available as an option for $58.00.
|
|
|
|
| PS30 ProStar 30A 12V/24V
solar controller |
263.00
|
|
The PS-30 solar controller is rated at 30A solar
input and 30A load current. It features pulse width
modulated series battery charging, low voltage load
disconnect and a choice of three programs for: gel,
sealed or flooded lead acid batteries. A remote temperature
sensor is available as an option for $58.00.
|
|
|
|
| PS30M ProStar 30A 12V/24V
solar controller, with digital meter |
385.00
|
|
The PS-30 solar controller is rated at 30A solar
input and 30A load current. It features pulse width
modulated series battery charging, low voltage load
disconnect and a choice of three programs for: gel,
sealed or flooded lead acid batteries. The digital
meter displays voltage, input current, output current
and temperature. It does not log amp-hours. A remote
temperature sensor is available as an option for $58.00.
|
|
|
|
| TS45 TriStar 45A three
function solar controller |
299.00
|
|
The TriStar TS-45 controller is a three-function
controller that provides reliable solar battery charging,
load control or diversion regulation. Suitable for
12V, 24V and 48V battery charging systems. Rated at
45A input and 45A output.
|
|
|
|
| TS60 TriStar 60A three
function solar controller |
384.00
|
|
The TriStar TS-60 controller is a three-function
controller that provides reliable solar battery charging,
load control or diversion regulation. Suitable for
12V, 24V and 48V battery charging systems. Rated at
60A input and 60A output.
|
|
|
|
| TSDM TriStar Digital
Meter |
173.00
|
|
|
|
Rainbow Power
| 20A 12V Powertech Solar
Charge Controller with LCD |
170.00
|
|
Display Microprocessor controlled with LCD display,
this charger efficently charges a vast selection of
batteries from a wide range of solar panels. Features
an equalisation mode for wet type lead acid batteries,
it automatically equalises the batteries once a month
for 2 hours. Weight - 470g Operating temp -10 to +50
degrees C
|
Back
to top of page
Phocos CML series Charge Controllers
The CML series is a sophisticated solar
charge regulator family for low cost applications. The
electronic circuit is equipped with a microcontroller
that provides high-efficiency charging technology together
with a number of outstanding status display, warning
and safety functions. Excellent battery treatment is
now available at reasonable cost and with long-term
reliability even at tough environmental conditions.
The temperature-compensated three-stage PWM charging
method (boost - equalization - float) is well proven
in the CR charge controller series. It is designed for
charging sealed and vented lead-acid batteries. The
battery status is clearly displayed by three LEDs. As
the first controller on the market in this price range
it comes with an acoustic low voltage load disconnect
pre-warning feature
| Phocos CML05-2 charge
controller |
55.00
|
The Phocos CML05-2 charge controller features
temperature-compensated three-stage PWM charging
method (boost - equalization - float) and low
voltage load disconnect. It is designed for charging
sealed and vented lead-acid batteries. The battery
status is clearly displayed by three LEDs. Max.
array current 5 A Max. load current 5 A System
voltage 12/24 V Self power consumption < 4
mA Dimensions (WxHxD) 80x100x32 mm Type of protection
IP20
|
|
|
|
Back to top of page
| Phocos CML15-2 charge
controller |
97.00
|
The Phocos CML15-2 charge controller features
temperature-compensated three-stage PWM charging
method (boost - equalization - float) and low
voltage load disconnect. It is designed for
charging sealed and vented lead-acid batteries.
The battery status is clearly displayed by three
LEDs. Max. array current 15 A Max. load current
15 A System voltage 12/24 V Self power consumption
< 4 mA Dimensions (WxHxD) 80x100x32 mm Type
of protection IP20
|
|
|
|
Maximum Power Point Trackers
| A.E.R.L. Maximizers |
Price on application
|
|
|
|
Meters & Shunts
| Sunergy System Monitor
SM1, with 100A shunt |
362.00
|
This is a digital metering unit able to display
amp-hours, voltage and current. It is designed
for panel or wall mounting and is suitable for
12V, 24V and 48V DC circuits, with currents up
to 200A. The meter requires an external 1mV/A
shunt
|
|
|
|
| Email single phase
240VAC kilowatt-hour meter |
140.00
|
This meter logs kilowatt-hours on a single
phase 240V AC circuit. Rated 15A - 100A.
|
|
|
|
| Merlin Gerin ME1
240VAC digital kWh meter |
280.00
|
A single phase 240VAC digital kWh meter .
Designed for 2 pole width DIN rail mounting
|
|
|
|
| Digital Battery
Meter & Clock |
42.00
|
Suitable for 12V and 24V Operation The Battery
Meter will atuomatically select 12V or 24V mode
once connected to the battery. Incorporates
a LCD digital voltage display and a LED red/yellow/green
for a at-a-glance battery condition display.
|
|
|
|
| Digital Battery
Meter & Clock |
42.00
|
Suitable for 12V and 24V Operation The Battery
Meter will atuomatically select 12V or 24V mode
once connected to the battery. Incorporates
a LCD digital voltage display and a LED red/yellow/green
for a at-a-glance battery condition display.
|
|
|
|
| 100A 50mV shunt |
30.80
|
| 200A 75mV shunt |
51.00
|
A general purpose shunt for measuring DC current
to 200A. Suits the Plasmatronics PLS2 shunt
adaptor
|
|
|
|
| Sinergex SIVIS6
Vision 6 Battery Monitor 3 banks |
499.00
|
Offers advanced software including Peukerts
Exponent giving extremely accurate battery performance
info. Easily read - hi-resolution LCD screen.
Volts, Amps, % remaining.
|
|
|
|
Relays
| voltage controlled
relay 12V 70A |
121.00
|
| voltage controlled
relay 12V 140A |
264.00
|
This relay switches on at 13.4V and off at 12.6V.
It is intended for use in controlling the charging
of an auxilliary battery, for example in a recreational
vehicle.
|
Load dumps
| extra low voltage water
heating element |
225.00
|
A heating element designed to fit into any standard
hot water system. Draws 10A @ 12V and 20A @ 24V.
Maximum rating is 600W [@30V]. For 48V systems use
two elements in series
|
|
|
|
|
|
|
 |
|
 |
For more information email
or phone Crystal on
07 40 962 420
at Planetary Power
|
|
We sell it - because
we live it.
|
|
|
|
|
© Planetary Power 2007
Planetary Power - Renewable Energy Solutions
P.O Box 198 Herberton 4887 North Queensland- Australia
email: info@planetarypower.com.au
web: www.planetarypower.com.au
phone: 07 40 962 420
Website by The
Webmeister ©2007
|
|
